Walkway Management Group
The Scientific Approach to Slip Resistance
people-walking-on-tiled-floor

ANSI A326.3 Slip Resistance Testing: The 2022 Standard, Explained for Facility Owners

[DRAFT REFRESH PROPOSAL – Monthly Content Engine, October 2026. CTR-rewrite/refresh of the existing live page /updated-standard-ansi-a326-3-22/ (position ~7.8, 1,224 impressions, ~29 lost clicks/mo, currently winning “ansi a326.3 testing”). Do NOT publish as a competing page; this intent is a cannibalization cluster, consolidate-only. Merge the new title, H1 and body into the existing page and set Yoast title/meta in wp-admin. Kept as status=pending.]

ANSI A326.3 Slip Resistance Testing: The 2022 Standard, Explained for Facility Owners

If you own or manage a building with hard flooring, ANSI A326.3 is the standard that turns “the floor feels slippery” into a number you can defend. It defines how slip resistance is measured, what the threshold is, and how the result should be reported. The 2022 revision refined the method, and it is worth understanding what changed.

What the standard actually measures

ANSI A326.3 specifies a wet dynamic coefficient of friction (DCOF) test using a calibrated tribometer. A standardized test foot is drawn across the floor under wet conditions, and the instrument records the ratio of friction force to the load. That single measured value tells you, objectively, how much traction the surface provides when it matters most: when it is wet.

What the 2022 update changed

The update tightened the test procedure and clarified how surfaces are categorized by use, so results are more repeatable between operators and more comparable between projects. In practice, that means a properly run A326.3 test today is harder to dispute and easier to act on than an older, looser assessment.

Who needs this test, and when

Specifiers use it before installation, to confirm a tile or coating meets the traction their space requires. Facility managers use it after installation and over time, because floors lose traction as they wear, get polished, or accumulate residue from cleaning products. Attorneys and insurers use it because a documented, standard-compliant measurement is far stronger evidence than an opinion after a fall has already happened.

Walkway Management Group runs ANSI A326.3 testing both in the field, on your floors as they exist today, and in the lab on submitted samples. If you need a defensible traction number, that is exactly what the standard, and our testing, is built to give you.

Learn more about slip resistance testing.

http://blurry-figures-walking-on-shiny-floor

Connect With an Expert!

Let’s discuss your floor safety needs. Our team of experts are ready to provide unparalleled knowledge and industry-leading solutions. Ensuring a scientific approach to floor safety is not just our job, it's our commitment.

Contact Us

    *Samples are available upon request

    Our Track Record

    Our compliance reports have prevented many slip and fall claims, saving clients millions in liabilities by demonstrating how their floors exceed national safety standards.

    Contact Us

      *Samples are available upon request

      Request a quote

        *Samples are available upon request